Pass Boiler Exam

Minnesota Special Engineer study guide

Minnesota Special Engineer, administered by Minnesota Department of Labor and Industry (DLI), Construction Codes and Licensing Division (CCLD), is mapped here as 8 topic areas; the heaviest are Fittings, Appurtenances & Safety Devices (22%), Safe Operation, Startup/Shutdown & Emergencies (22%) and Feedwater & Water Treatment (15%).

About this course: Study Minnesota Special Engineer boiler fundamentals, safety devices, feedwater, combustion and operating procedures with narrated lessons, memory cards and original explained practice.

Minnesota Special Engineer at a glance

Questions
50
Time allowed
2 hours 30 minutes (2.5-hour time limit; applies to all MN boiler exams)
Passing standard
70% minimum passing grade = 35 of 50 questions correct
Format
State-administered written multiple-choice examination (not vendor-delivered CAT). 70% to pass
Standard / edition
Current MN DLI boiler license classifications, Last Updated September 2023
Administered by
Minnesota Department of Labor and Industry (DLI), Construction Codes and Licensing Division (CCLD)

Source: Current MN DLI boiler license classifications, Last Updated September 2023, Minnesota Department of Labor and Industry (DLI), Construction Codes and Licensing Division (CCLD). Confirm current details with the exam owner before you book.

Topic areas and weights

Topic areaWeightConceptsGuide
Exam Orientation0%1Section below
Boiler Fundamentals & Construction14%1Section below
Fittings, Appurtenances & Safety Devices22%5Section below
Feedwater & Water Treatment15%1Section below
Combustion, Fuels & Draft15%1Section below
Safe Operation, Startup/Shutdown & Emergencies22%4Section below
Steam Systems, Piping & Auxiliaries6%1Section below
Codes, Licensing & MN Regulations6%0Section below

Study plan in this course

  1. Before the Boiler-Room Boards: Your MN Special Engineer Exam — 3 cards · free
  2. The Boiler Itself: Construction, Horsepower & Pressure — 9 cards · free
  3. The Safety Fittings: Valves, Cutoffs & the Water Column — 12 cards · full course
  4. Feedwater & Treatment: Scale, Oxygen & Blowdown — 8 cards · full course
  5. The Fire Side: Combustion, Fuels & Draft — 8 cards · full course
  6. On Shift: Startup, Shutdown & the Low-Water Emergency — 12 cards · full course
  7. The Steam Side: Saturation, Traps & Condensate — 4 cards · full course
  8. The Codes: ASME, the NBIC & Minnesota Rules — 3 cards · full course

Exam Orientation

Exam Orientation is one of the 8 areas in this course's Minnesota Special Engineer blueprint. It spans 1 concept. The course teaches it in 1 study unit: Before the Boiler-Room Boards: Your MN Special Engineer Exam.

What Exam Orientation covers

  • Why is the Special the license every Minnesota boiler engineer starts with? — MN DLI Boiler License Classifications PDF, footnote 2

Official references for Exam Orientation

  • MN DLI Boiler License Classifications PDF, Special row + DLI licensing page
  • MN DLI Boiler License Classifications PDF, footnote: 2
  • MN DLI Boiler License Classifications PDF

In the app this area comes with 3 memory cards and 3 module-quiz questions and is part of the free starting modules.

Boiler Fundamentals & Construction

Boiler Fundamentals & Construction carries 14% of the Minnesota Special Engineer blueprint used in this course, the 5th-largest of its 7 weighted areas. It spans 1 concept. The course teaches it in 1 study unit: The Boiler Itself: Construction, Horsepower & Pressure.

What Boiler Fundamentals & Construction covers

  • Using the rule of thumb, how much heating surface is one boiler HP? — ASME heating-surface horsepower rule-of-thumb

Official references for Boiler Fundamentals & Construction

  • Steingress, Low Pressure Boilers
  • ASME / Steingress, Low Pressure Boilers
  • ASME 1884 boiler-horsepower definition
  • ASME heating-surface horsepower rule-of-thumb
  • ASME BPVC / National Board Inspection Code
  • Standard engineering

In the app this area comes with 9 memory cards and 14 module-quiz questions and is part of the free starting modules.

Fittings, Appurtenances & Safety Devices

Fittings, Appurtenances & Safety Devices carries 22% of the Minnesota Special Engineer blueprint used in this course, the largest of its 7 weighted areas. It spans 5 concepts. The course teaches it in 1 study unit: The Safety Fittings: Valves, Cutoffs & the Water Column.

What Fittings, Appurtenances & Safety Devices covers

  • Safety valve vs relief valve — which fluid and which action? — ASME BPVC
  • What does the water column do? — Steingress, Low Pressure Boilers
  • What is the gauge glass, and how often is it blown down? — Steingress / National Board
  • What does the low-water fuel cutoff do, and which boilers need one? — National Board 'Low-Water Cutoff: A Maintenance Must'
  • What is a fusible plug, and what does it warn of? — Steingress / National Board

Official references for Fittings, Appurtenances & Safety Devices

  • ASME BPVC Section I / National Board
  • ASME BPVC Section I
  • ASME BPVC
  • National Board / ASME
  • Steingress, Low Pressure Boilers
  • Steingress / National Board
  • National Board 'Low-Water Cutoff: A Maintenance Must'
  • National Board

In the app this area comes with 12 memory cards and 22 module-quiz questions in the full course.

Feedwater & Water Treatment

Feedwater & Water Treatment carries 15% of the Minnesota Special Engineer blueprint used in this course, the third-largest of its 7 weighted areas. It spans 1 concept. The course teaches it in 1 study unit: Feedwater & Treatment: Scale, Oxygen & Blowdown.

What Feedwater & Water Treatment covers

  • What does the feedwater check valve do? — Steingress, Low Pressure Boilers

Official references for Feedwater & Water Treatment

  • Steingress, Low Pressure Boilers
  • Steingress / ASME
  • Steingress / National Board

In the app this area comes with 8 memory cards and 15 module-quiz questions in the full course.

Combustion, Fuels & Draft

Combustion, Fuels & Draft carries 15% of the Minnesota Special Engineer blueprint used in this course, the 4th-largest of its 7 weighted areas. It spans 1 concept. The course teaches it in 1 study unit: The Fire Side: Combustion, Fuels & Draft.

What Combustion, Fuels & Draft covers

  • What three things does combustion require? — Steingress / OSHA

Official references for Combustion, Fuels & Draft

  • Steingress / OSHA
  • Steingress, Low Pressure Boilers
  • Steingress / NFPA: 85
  • National Board / NFPA

In the app this area comes with 8 memory cards and 15 module-quiz questions in the full course.

Safe Operation, Startup/Shutdown & Emergencies

Safe Operation, Startup/Shutdown & Emergencies carries 22% of the Minnesota Special Engineer blueprint used in this course, the second-largest of its 7 weighted areas. It spans 4 concepts. The course teaches it in 1 study unit: On Shift: Startup, Shutdown & the Low-Water Emergency.

What Safe Operation, Startup/Shutdown & Emergencies covers

  • What do you check before lighting off a cold boiler? — Steingress, Low Pressure Boilers
  • Why keep a vent open during startup? — Steingress, Low Pressure Boilers
  • Walk the bottom-blowdown valve sequence. — Steingress / National Board
  • Why must the crown sheet stay covered with water? — National Board / Steingress

Official references for Safe Operation, Startup/Shutdown & Emergencies

  • National Board
  • National Board / Steingress
  • Steingress, Low Pressure Boilers
  • Steingress / National Board
  • ASME / National Board

In the app this area comes with 12 memory cards and 22 module-quiz questions in the full course.

Steam Systems, Piping & Auxiliaries

Steam Systems, Piping & Auxiliaries carries 6% of the Minnesota Special Engineer blueprint used in this course, the 6th-largest of its 7 weighted areas. It spans 1 concept. The course teaches it in 1 study unit: The Steam Side: Saturation, Traps & Condensate.

What Steam Systems, Piping & Auxiliaries covers

  • Why return condensate to the boiler? — Steingress, Low Pressure Boilers

Official references for Steam Systems, Piping & Auxiliaries

  • Saturated-steam tables
  • Steingress, Low Pressure Boilers

In the app this area comes with 4 memory cards and 6 module-quiz questions in the full course.

Codes, Licensing & MN Regulations

Codes, Licensing & MN Regulations carries 6% of the Minnesota Special Engineer blueprint used in this course, the 7th-largest of its 7 weighted areas. The course teaches it in 1 study unit: The Codes: ASME, the NBIC & Minnesota Rules.

Official references for Codes, Licensing & MN Regulations

  • Minnesota Rules Ch.: 5225
  • ASME BPVC Section I / Section IV
  • ASME BPVC Section IV

In the app this area comes with 3 memory cards and 6 module-quiz questions in the full course.

Official references

  • MN DLI Boiler License Classifications PDF, Special row + DLI licensing page
  • MN DLI Boiler License Classifications PDF, footnote: 2
  • MN DLI Boiler License Classifications PDF
  • Minnesota Rules Ch.: 5225
  • MN DLI licensing-boiler-engineer page, retrieved: 2026-07-12
  • Minnesota Rules Chapter: 5225
  • Minnesota Statutes chapter: 326B
  • Steingress, Low Pressure Boilers
  • ASME / Steingress, Low Pressure Boilers
  • ASME 1884 boiler-horsepower definition
  • ASME heating-surface horsepower rule-of-thumb
  • ASME BPVC / National Board Inspection Code
  • Standard engineering
  • ASME BPVC Section I / National Board
  • ASME BPVC Section I
  • ASME BPVC

Start the free Minnesota Special Engineer modules → · Pricing · FAQ